Showing posts with label Solutions. Show all posts
Showing posts with label Solutions. Show all posts

Thursday, September 29, 2016

Best Storefront Security Solutions in Toronto

Very best Storefront Safety Solutions in Toronto


Emart Factory Corporation was identified in 1989 and is in enterprise since 2002. They have been supplying large and modest firms in the previous decades .They specialize in steel fabrication, machining, aluminum extrusion, aluminum casting, iron &amp steel casting, plastic injection, powder coating, zinc and chrome plating.


The Product quality of Emart factory corp is mind-blowing there aim is to generate high quality products and consumer friendly product. Emart styles and manufacturing is exceptionally good, from storefront security, to Ergonomic, to OEM to Railing Accessory to organizer business.


They also specialize in security market and no one can challenge the security item they provide, as for instance storefront security, fixed windows bars, basement window bars, sliding grille, rolling shutters, wrought iron doors, security wire mesh, safety film, security sliding glass door, CCTV cameras, and service door bar, wrought iron fencing.


In storefront safety they provide free of charge consultation, totally free onsite quotation, various colour choice and sizes. Emart has a lot of stock and plenty of application which could accommodate virtually any windows or door size. The manufactures of safety folding gates and sliding Grill also comes in various sizes. The diamond hole as tiny as two.five and quot exactly where only two fingers can go by means of. In Safety folding gate, regular folding gate they use really powerful unique aluminium rivet connecting 13mm and times 13mm square tubing with each other. two,5 mm U- Channel frame producing the gate steady and stronger. Also place self -lubricate washer amongst tubing protection scratching, and make it expand very smooth and straightforward. Effortless to use automatic pushing lock or cylinder lock. The finishing is quite higher finish powder coating, make surface smooth. Particular therapy gate can safeguard rust 10 years outdoors Security folding window bar usage. Fire exit door safeguarding people touch thumb from outdoors.


Window and door protection partition panel cage panel offered in various colors and amp sizes. Thus Canadian window and door security is a single of the division of Emart factory corp
The products are sent by way of the distribution centers in Canada (Toronto), United States, Europe, China and South America.


The Engineer and design department can provide custom based solution-improvement and implementation. The good quality manage department is accountable for the sturdy quality. As much more than twenty years history in the manufacturing business they are committed to provide the industry solution at factory direct pricing without having compromising top quality. The aim is to offer the competitive prices.


The factory is team-based connection with the buyers and method both challenges and possibilities together. At Emart Factory Corp, the rates are really competitive and also price matched. The complete goods are installed by the specialist installers and also give installation drawings and instruction.


The concentrate is to establish long-term relationships with the customers and to provide assistance to each and every consumer.



You can uncover out a lot more about – safety gate ontario, rolling grille toronto

Friday, September 2, 2016

Best Storefront Security Solutions in Toronto

Very best Storefront Security Options in Toronto


Emart Factory Corporation was located in 1989 and is in enterprise considering that 2002. They have been supplying large and tiny companies in the past decades .They specialize in steel fabrication, machining, aluminum extrusion, aluminum casting, iron &amp steel casting, plastic injection, powder coating, zinc and chrome plating.


The Product quality of Emart factory corp is mind-blowing there aim is to make top quality goods and consumer friendly solution. Emart styles and manufacturing is exceptionally very good, from storefront security, to Ergonomic, to OEM to Railing Accessory to organizer market.


They also specialize in safety business and nobody can challenge the safety solution they give, as for instance storefront security, fixed windows bars, basement window bars, sliding grille, rolling shutters, wrought iron doors, security wire mesh, security film, security sliding glass door, CCTV cameras, and service door bar, wrought iron fencing.


In storefront safety they offer free consultation, free onsite quotation, diverse colour selection and sizes. Emart has lots of stock and lots of application which could accommodate almost any windows or door size. The manufactures of security folding gates and sliding Grill also comes in various sizes. The diamond hole as small as 2.5 and quot where only two fingers can go by way of. In Security folding gate, typical folding gate they use extremely robust unique aluminium rivet connecting 13mm and times 13mm square tubing together. 2,five mm U- Channel frame creating the gate steady and stronger. Also put self -lubricate washer amongst tubing protection scratching, and make it expand really smooth and simple. Effortless to use automatic pushing lock or cylinder lock. The finishing is very higher finish powder coating, make surface smooth. Specific remedy gate can protect rust 10 years outside Security folding window bar usage. Fire exit door protecting men and women touch thumb from outside.


Window and door protection partition panel cage panel offered in different colors and amp sizes. Therefore Canadian window and door safety is one of the division of Emart factory corp
The merchandise are sent via the distribution centers in Canada (Toronto), United States, Europe, China and South America.


The Engineer and style division can supply custom based solution-improvement and implementation. The high quality control division is responsible for the sturdy top quality. As much more than twenty years history in the manufacturing market they are committed to provide the market place solution at factory direct pricing without compromising good quality. The aim is to supply the competitive costs.


The factory is group-based connection with the clients and method both challenges and opportunities with each other. At Emart Factory Corp, the rates are really competitive and also price matched. The entire merchandise are installed by the professional installers and also supply installation drawings and instruction.


The concentrate is to establish extended-term relationships with the buyers and to offer help to each client.



You can locate out a lot more about – safety gate ontario, rolling grille toronto

Thursday, May 26, 2016

High Demand for CNC Machining Solutions

High Demand for CNC Machining Solutions


The demand for cnc machining options has registered an exponential improve in current years, as businesses have understood that using the CNC technologies will translate into smaller production fees and larger output. In case you want a cnc milling machine that will decrease the operating costs of your firm to half, you have two possibilities: you can either acquire such a machine or outsource your milling requirements and hence benefit from specialized solutions. The option in the end depends on your spending budget and on how considerably money you can afford to assign to milling operations.


A handful of years ago, most processing equipments were manually handled and needed the active participation of a number of workers who were supposed to load the pieces on the function platform, to adequately position them, to unload them at the finish of the perform cycle, and so forth. Nowadays, the cnc machining process is either semi or totally automatic and the major duty of the operator is to monitor the activity and make sure that every thing operates as scheduled. The operator must have comprehensive understanding of the cnc machining technology, need to be in a position to right away determine potential sources of errors or dangers and should instantly quit the machine in case some thing goes wrong.


Most companies who implement the cnc milling technology send their operators to specialized instruction courses exactly where they understand every little thing they require to know about cnc processes. This way, firms make sure that their workers are adequately prepared for any predicament that may come their way and that they have nothing to worry about. Offered the truth that cnc machines are extremely complex and pricey, their maintenance can also be rather high-priced. Consequently, numerous firms select to outsource their cnc milling wants and to hence stay away from the expenses linked with the set-up of the cnc machines, their upkeep, staff education, and so on.


In case you want custom cnc machining options, but you can’t afford to invest to acquire the needed cnc technologies, you can resort to the services of a firm which delivers complete machine component supply options, such as prototyping, stock holding, high quality control, subassembly and despatch. This way, you can advantage from the essential services at inexpensive fees and you can be definitely confident that your items will be flawless. By making use of totally automatic machining tactics, machining errors are entirely eliminated and the supplied products are sure to observe all the overall performance and quality standards mentioned by the manufacturer.


If you have decided to start making high-good quality elements with the aid of cnc technology, you need to look for a organization with quite a few years of expertise in this sector. Also, it would not hurt to verify regardless of whether the business you intend to hire supplies comprehensive cnc options, like cnc milling, cnc turning, 5 axis milling, sliding head turning, and so forth. Businesses which want to lessen their production fees, boost their efficiency and attract much more clients with their merchandise of premium top quality ought to certainly commence using the cnc technology the benefits will turn out to be visible really quickly.



We pride ourselves with our cnc machining technology which meets the expectations of our most demanding clients. We usually pay focus to our customers’ requirements and requirements and we promise to offer you with cost-efficient and effective cnc milling options anytime you retain our solutions.


Uncover More Cnc Machining Procedure Articles

Sunday, December 7, 2014

Cool Grinding Solutions pictures

Some cool grinding solutions pictures:


In honor of the 3rd hurricane to maybe hit Houston in 2008 my girlfriend has this friendly PSA: “Fill your gas tanks! Go barefoot if you must. Sacrifice your children and dogs. Whatever it takes!”


Image by colorblindPICASO

Seriously, every single time we get a hurricane warning I get this strange feeling the art will have to come off the walls… have any of you Observed OUR WALLS?!?


Also, this photo reminds me of all the paparazzi photographs of Brittney Spears walking about a gas station barefoot a few years ago. What was all that about? It is a pretty frequent web site on interstate highway stations. A dirty public bathroom even though barefoot might be a various story even though…


One final thing, see that smile on her face? Yes… to those that have asked. She DOES smile from time to time.=)


A Trailhead


Image by IceNineJon

This is the trailhead for one particular of the a lot of hikes in Muir Woods. Sadly, I didn’t have adequate time and the ground was incredibly muddy so I wasn’t able to adhere to this trail but I want to return some day and check it out!


ABOUT THIS SERIES

I’d been to Muir Woods numerous occasions in my childhood but the final time I was there I cannot recall. I was inspired to return after watching the Ken Burns series The National Parks: America’s Very best Concept on PBS.


Muir Woods, is the nation’s sixth national monument but the first that was designed from private land (the land was donated by William Kent). The woods are property to Coast Redwood trees (Sequoia sempervirens) which can grow to over 370 feet tall and 26 feet in diameter.


I believe Muir Woods is 1 of the most lovely locations on Earth. If you happen to be ever in the San Francisco Bay Location, I highly encourage you to check out it. You won’t be disappointed.

Friday, December 5, 2014

Cool Fast Machining Solutions photos

A few nice rapid machining services images I found:


Stanley Jefferson


Image by Runs With Scissors

He was the rage when I went to Truman High School in the Bronx and was friends with many of my friends too. He and I came grew up in the same Bronx neighborhood.


Check out Sunday’s Daily News


Forgotten Hero


Former Met Stanley Jefferson struggles to cope with horror of life as 9/11 cop


BY WAYNE COFFEY, DAILY NEWS SPORTS WRITER


Four flights up in Co-Op City, at the end of a hallway in Building 26, the big man sits in a big brown recliner, boxed in by four walls and demons and an emptiness that doesn’t end. If only it did. If only it were finite, measurable, like the outfields of Yankee Stadium and Shea Stadium, or the other big-league parks he once called home.


Then Stanley Jefferson might be able to know exactly what he’s dealing with. Then he might be able to go outside, go to work, maybe share the things he still believes he has to give, and begin to pick up the shards of a life that sometimes seems broken beyond recognition.


It is early in a late-winter afternoon. In Florida the Mets and Yankees are playing their first spring-training games, the sense of renewal as palpable as the palm trees. In Building 26 in the Bronx, the feeling is different, and has been ever since Sept. 11, 2001. Stanley Jefferson, former big-league ballplayer and former New York City police officer, and one of the greatest schoolboy players the city has ever produced, has the remote in his hand, and his beloved Yorkshire terrier, Rocky, on his lap. His wife, Christie, is off at her job at a social-services agency in Westchester. The apartment is crammed with a sectional sofa and a desk and exercise machines that sit unused. Against one wall is a big fish tank. All the fish are dead. Against another is a big-screen television, where Jefferson plays his video games, and watches his comedies, laugh tracks sounding as days pass into weeks, and weeks into months.


"Raymond," "Family Guy," "Two and a Half Men," Stanley Jefferson likes them all.


"They keep my spirits up, rather than crying or brooding," he says. A faint smile crosses his broad, goateed face. The spirits do not stay up for long.


Fifteen years after his baseball career ended with a ruptured Achilles, two years after his police career ended when the department declared him unfit for duty, 44-year-old Stanley Jefferson, former shield No. 14299 and former uniform No. 13, wrangles with the NYPD over his disability benefit, and with a much more debilitating enemy: the ravages of post-traumatic stress disorder. It is a condition that the National Center for Post-Traumatic Stress Disorder, a division of the U.S. Dept. of Veteran Affairs, defines as "an anxiety disorder that can occur following the experience or witnessing of a traumatic event." For Jefferson, it has spawned everything from agoraphobia to panic attacks to immobilizing depression to recurring nightmares – one in which he is tormented by a ball of fire reminiscent of the explosion he witnessed when the second plane flew into the second tower a few minutes after 9 a.m. on 9/11, another in which he desperately tries to save a people in peril, but never manages to reach them.


Once, in 1983, Jefferson was a first-round draft choice of the Mets (taken one slot after the Red Sox selected a pitcher named Clemens), a blindingly fast, 5-11, 175-pound center fielder out of Truman High School, and Bethune-Cookman College in Daytona Beach. He still might be the fastest player the organization has ever had. He was clocked running a 4.27 40 on a wet track during his Met tryout, and was timed at 3.0 from home to first in college. He had some 120 steals in his first three minor-league seasons, and hit an inside-the-park grand slam. Now he is 255 pounds and speeding nowhere.


He leaves the apartment about only twice a week, and even then it’s only if he feels safe, if he’s meeting someone close to him, such as Steve Bradstetter, 40, a Long Island businessman who is perhaps his closest friend.


"I have no life," Jefferson says, in a flat, baritone voice. "I’ve screwed up a lot of days." He pauses. He wrings his hands, something he does often. "I always thought this was something that would pass. I thought I could overcome anything, because that’s just my athletic mentality. I’m ashamed because I never thought that something like this could happen to me."


Says Christie, his wife of three years, "This is not the man I married."


* * *

Even by the sculpted body standards of professional sports, Stanley Jefferson’s physique – ropes of lean muscle on top of thick sprinter’s legs – always stood out. When you saw him in motion, it stood out even more. Willie Daniels, 44, a childhood friend of Jefferson’s from Co-Op City, played Little League with him, the two of them coached by Everod Jefferson, Stanley’s father. They went to Truman High together and then to Bethune-Cookman. Daniels still marvels at the time Jefferson beat out a two-hopper to first against the University of Miami. In one college season, Jefferson stole 67 of 68 bases, getting caught only when his spikes got stuck on a wet track.


"I played with Devon White, Shawon Dunston, Walt Weiss, a lot of guys. Stanley is one of the best pure athletes I’ve ever seen," Daniels says.


The Mets did not disagree. Two years after he made his pro debut in the Single-A New York-Penn League and was the league’s rookie of the year, Jefferson was one of the sensations of the club’s training camp. The year was 1986, and seven months before Mookie Wilson and Bill Buckner would become odd baseball bedfellows, Davey Johnson was likening the 23-year-old Jefferson to Chili Davis. Steve Schryver, director of minor-league operations, saw him as a young Bake McBride. Jefferson hit .500 in the spring, and if not for GM Frank Cashen’s reluctance to rush him, he probably would’ve made the team.


"How can you not love his future?" Rusty Staub said then. "You look at his skills and think ‘leadoff man.’ You think about 100 runs a season." Nor was he just a weapon at the top of the order. "If the ball is in the ballpark, Stanley Jefferson will catch it," said Joe McIlvaine, the future GM, envisioning Jefferson spending years alongside Darryl Strawberry.


Jefferson wound up fighting injuries most of the ’86 season in Tidewater, struggling with a chronic wrist problem and a hamstring pull. Still, he got a September call-up, and picked up his first big-league hit off the Padres’ Dave LaPoint. It was supposed to be just the beginning, before the performance of Lenny Dykstra and the lure of a star left fielder induced the Mets to make Jefferson a key part of a winter deal that brought Kevin McReynolds to Flushing. Fourteen games wound up being the entirety of Jefferson’s Met career.


Jefferson showed patches of promise in San Diego, stealing 34 bases in hitting eight homers and seven triples in 116 games, before a late-season slump left him with a .230 average. A natural righty who was converted into a switch-hitter by the Mets after he was drafted, Jefferson struggled from the left side, and wound up having trouble on his natural side, too. He had a run-in with manager Larry Bowa, and soon found himself on a journeyman’s carousel, doing bits of time with the Yankees, Orioles, Indians and Reds before he tore his Achilles tendon while playing winter ball in Puerto Rico after the 1991 season. He says he had tendinitis for years, but played through it. It wouldn’t be the last time Jefferson would ignore pain, try to push through it.


"Physically, athletically, I had all the tools. I didn’t live up to those lofty expectations," Jefferson says.


With baseball behind him, Jefferson went to work as a warehouse manager of a lighting company in Mt. Vernon, then spent a couple of years coaching in the minor leagues with the Mets and an independent team in Butte, Mont. His larger goal, though, was to become a New York City police officer. "I always wanted to be a cop, a detective," Jefferson says. He took the exam, went through a battery of psychological and physical tests and was sworn in on Dec. 8, 1997. "He was the perfect package for what you look for in a police officer," says Eric Josey, one of his instructors in the Police Academy. Jefferson graduated in the spring of 1998, posed for a graduation picture with Mayor Giuliani and Commissioner Safir, then was assigned to the 14th Pct., Midtown South.


"I would always tell him, ‘You got to live your dream twice,’" Willie Daniels says. "Most people don’t even get to live their dream once."


For almost four years, police work was all Jefferson hoped it would be. Another Labor Day came and went. Kids went back to school. It was a dazzlingly beautiful late-summer morning. It was a Tuesday.


* * *

Stanley Jefferson reported for work at 7:05 a.m. on Sept. 11, having flown all night on a red-eye after a family wedding in Seattle. Two hours later, in squad car 1726, he and his partner, Ed Kinloch, were at 6th Ave. and 38th St. They were eating breakfast. Jefferson, his muscled body built up to 210 pounds by regular trips to the gym, was having his usual bowl of oatmeal. A voice on the radio came on. It told of an explosion at the World Trade Center. They started heading downtown before being ordered to stop at Union Square. Jefferson and Kinloch got out of the car. Jefferson looked downtown and got his first glimpse of the remains of the first tower. He saw people jumping. He saw people waving towels, and more smoke than he’d ever seen in his life. He was still trying to fathom it when he watched the second plane rip right through the second tower. There was a ball of fire. It took a second or two for the sound of the horrific explosion to reach 14th St. Jefferson and Kinloch looked at each other.


"Oh, bleep," Kinloch said. "Did you see that?"


"We’ve got a problem here," Jefferson said.


They were told to stay around 14th St. Jefferson and Kinloch did what they could to help and direct people, and comfort them. "There was a lot of crying, a lot of hugging," Jefferson says. "You try to stay focused and do your job and not get caught up in people’s emotions, but it’s hard." A series of bomb threats followed. Jefferson worked until 9 p.m., and was back at Midtown South at 4 a.m., on the 12th. On Thursday and Friday, the 13th and 14th, Jefferson was at Ground Zero, according to his memo book. "World Trade Detail," he wrote. Each day, Jefferson worked a 12-hour shift – from 4 a.m. to 4 p.m., on the pile, on the bucket brigade, putting body parts in bags, the carnage seemingly endless, the beeping of the empty oxygen packs of departed firefighters a shrill symphony that never stopped. The packs and other equipment, most of it with burnt flesh attached, were thrown into a makeshift tent.


"It was the smell of death in there, a smell you never forget," Kinloch says.


Jefferson spent a number of other shifts around Ground Zero in the ensuing weeks, and by the end of the year, began to suffer from coughing spells and nightmares. He didn’t think much of it at first, until his symptoms worsened in the spring of 2002, not long after he was transferred to the Internal Affairs Bureau (IAB), a move that he hoped would lead to a rapid promotion to detective. He started to experience periodic panic attacks, in which he would sweat profusely and feel his heart pounding as if it were a jackhammer. He also had trouble sleeping. While preparing reports for his IAB work, Jefferson says he began typing the same paragraph over and over.


"I didn’t know what was happening," he says. He did his best not to think about it, hoping it would go away.


"I was in complete denial," Jefferson says. "I wanted to be a detective, period. I just wanted to fake it until I could make it."


Bradstetter began to wonder what was going on with his friend. He and Jefferson used to play golf all the time, but now Jefferson had no interest in it. He stopped working out, began gaining weight and found it harder and harder to leave the apartment. First, Jefferson would make excuses to Bradstetter. Later he opened up, just a little.


"I don’t know what’s wrong with me," Jefferson told him.


Jefferson’s agoraphobia got progressively worse, and so did the panic attacks. His personal datebook shows 41 sick days in the first few months of 2003. Then, in March, days after he underwent an angiogram to correct a 30% blockage in his heart, Jefferson’s mother died suddenly, and the combination of grief and the ongoing aftershocks of 9/11 sent him spiraling downward.


* * *

To say that Jefferson feels betrayed by the police department he dreamed of being a part of is to grossly understate it. He believes that in his time of greatest need, he was treated with all the sensitivity of a pine-tar rag.


Perhaps the first major issue he had came down on June 23, 2003, just when his problems were deepening. Jefferson had a doctor’s appointment and told his immediate supervisor, Sgt. Michael Dowd, about it when his shift started. A short time before Jefferson had to leave, Dowd requested that he finish up a case he was working on. Jefferson reminded him of his appointment. Dowd insisted that Jefferson do the work, and Jefferson refused to comply. In an incident report to Capt. Michael O’Keefe, Dowd said Jefferson was profane and belligerent, screaming, ‘Who the bleep do you think you are talking to?"


Jefferson, in a counter-complaint, says that Dowd was upset because he wanted to leave to play golf. Jefferson subsequently filed a discrimination lawsuit in federal court, a case that he settled out of court for ,000 last year.


Five days after the dispute with Dowd, Jefferson suffered a panic attack as he drove from Co-Op City to the IAB office on Hudson Street. His vision was blurry, his heart pounding. Sweat was pouring out of him. He pulled over and went to the Lenox Hill Emergency Room. Jefferson’s bouts with panic – and fears he was having a heart attack – had made him such a regular at the ER in Our Lady of Mercy Hospital in Pelham that one technician gently told him he needed to stop coming. Now here he was in an ER again. He was terrified. He privately wondered when his troubles were going to end, and if he were going insane. He says his department superiors continually ignored his pleas – and the counsel of his therapist – to reduce his caseload and shift him from investigative to administrative work, an opinion that is backed up by Sgt. John Paolucci, another IAB officer who supported Jefferson in a letter to the department Medical Board.


"No consideration for his predicament was afforded him," Paolucci wrote, adding that the whole culture of the department tends to make anyone who is incapacitated an outcast. "Most will doubt the veracity of your illness and compassion is out of the question."


Police officials declined to address any specifics relating to Jefferson’s case.


Not even 48 hours after his visit to Lenox Hill, Jefferson, of his own volition, went to the NYPD’s Psychological Evaluation Unit in Queens. He had a two-hour intake meeting with a department therapist, Christie at his side. His two handguns were taken from him that day, and have never been returned, Jefferson being deemed unfit for police work. He was transferred to the VIPER unit – the lowest level of police work, involving the monitoring of surveillance cameras. "It’s the land of broken toys – where they send anyone with charges pending or a problem that makes them unable to work," Jefferson says.


On Nov. 8, 2004, the NYPD moved to place him on Ordinary Disability Retirement (ODR), based on a diagnosis of the department Medical Board of "major depressive disorder." Jefferson later applied for Accidental Disability Retirement (ADR), on the grounds that his condition was triggered by his Post-Traumatic Stress Syndrome in the wake of 9/11 – a diagnosis made separately by a social worker and a psychiatrist who have treated Jefferson.


The ODR amounts to ,400 monthly. An ADR – granted to officers mentally or physically incapacitated in the line of duty – would provide Jefferson with just under ,000 monthly, tax-free. The Medical Board and the Pension Board, citing reports by psychiatrists, social workers and an examination of Jefferson, said his mother’s death and his heart problems were major triggers of his condition, and also mentioned the depressed feelings he had when his first wife and two daughters left him, in 1991. The Boards asserted that there was insufficient evidence to support a connection to 9/11 and Jefferson’s problems – a finding upheld in State Supreme Court in Manhattan last October.


Said Carolyn Wolpert, deputy chief of the pensions division of the city law department, "The city is grateful to Stanley Jefferson for his almost eight years of service as a police officer. Due to medical issues, the Police Pension Fund retired Officer Jefferson with ordinary disability benefits . . . The New York County Supreme Court found that there was credible medical evidence to support the determination that the officer’s disability was not caused by his World Trade Center assignment." Jeffrey L. Goldberg, a Lake Success, L.I.-based attorney representing Jefferson, is planning on filing a second application for ADR benefits for Jefferson. Only nine officers who responded to the World Trade Center attacks have been granted accidental disability benefits for psychological reasons, according to a police source. Goldberg believes it is all but a de facto administration policy. "Mayor Bloomberg considers accidental disability retirement a free lunch for a police officer like Stanley Jefferson," Goldberg says. "This is no free lunch. This is the real-life consequence of an officer responding to a tragedy and an emergency. Stanley Jefferson is a hero. He should be aided, not discarded. Hopefully, the city will recognize that and support him as he tries to recover from a terribly serious medical condition."


* * *

Last week was a good one for Stanley Jefferson. He made it to Goldberg’s office, after canceling a series of previous appointments. His daughters, Nicole, 21, and Brittany, 19, came to visit from Virginia. He went for coffee at a bookstore near Co-Op City, and opened up about every aspect of his six-year ordeal: his shame, his vulnerability, his embarrassment over having such a hard time walking out of Building 26, being in the world.


"I know people can’t understand it. I can’t understand," he says. He talks about the medications he takes to ease his anxiety and his depression, and about the drinking binges – Grey Goose and cranberry – he used to go on to escape his pain. "It’s what got me outside," Jefferson says. It also got him into full-blown rages, and a Westchester County treatment center last fall. He didn’t want to talk when he got there, before he began to see that his therapist was right: the silent suffering was nothing but fuel for the demons.


"I can’t let pride get in the way," Jefferson says.


Adds wife Christie, "I keep telling him he’s got to forget all the machismo right now, and realize he’s not the only one who has gone through this in his life, and work on taking care of himself." Steve Bradstetter, Jefferson’s friend, will always be grateful to Jefferson for the way he responded when Bradstetter’s mother died. It was February of 2000, and Jefferson accompanied Bradstetter on a drive to Massachusetts. "It was about the toughest circumstance I’ve ever had to deal with, and he was there for me," Bradstetter says. "He was like, ‘We’ll talk, we’ll laugh, we’ll try to make sense of it all.’"


Stanley Jefferson is a very different person than he was then. He is sad and often distant. When he and Bradstetter arrange to meet at a Dunkin’ Donuts or a diner, Jefferson waits in the car until he sees Bradstetter pull up. Only then does he feel safe enough to get out. Sometimes Bradstetter will see his friend start wringing his hands, see the beads of sweat running down his temple, his leg jiggling as it were stuck in full throttle. Bradstetter doesn’t know what to say. "It’s like his whole body is taken over by whatever issues he’s dealing with." He offers what comfort he can. He knows the real Stanley is still in there.


Tomorrow afternoon, Stanley Jefferson is supposed to go to Dobbs Ferry to meet with Bill Sullivan, the Mercy College baseball coach. Jefferson finished his degree at Mercy while he was on the force. Sullivan has gotten to know him and like him, and would love to have him help out as a volunteer assistant.


"He would be such an asset for our program," Sullivan says.


From his big brown chair on the fourth floor, Jefferson looks out a window, toward his terrace and a barren Co-Op City courtyard. He talks about the things he has to share in the world, how maybe he can work with kids. He says helping out at Mercy would be a great start. Jefferson knows he can’t cure his illness, but he can face it, and battle it. The towers may be down forever, and his days of getting to first in three seconds may be behind him. But who says the rebuilding of a life can’t begin anew? Who says a 44-year-old man can’t get back to first and second and third, and all the way back home, no matter how long it takes?


The big man leans back in his chair.


"I do have optimism," Stanley Jefferson says. "I do believe that I’m strong enough that I will eventually get better. I just have to keep working at it."


Originally published on March 4, 2007


Staff Sgt. Sal Giunta receives Medal of Honor in White House ceremony Nov. 16, 2010


Image by US Army Africa

Fire Base Vegas, Korengal Valley, Afghanistan.


U.S. Army photo


President Barack Obama presented the Medal of Honor for conspicuous gallantry to Staff Sgt. Salvatore Giunta, U.S. Army, in a ceremony held in the East Room of the White House Nov. 16, 2010 — the first living service member from the Iraq or Afghanistan wars to receive it.


When enemy forces in Afghanistan’s Korengal Valley ambushed then-Spc. Giunta’s platoon on the evening of Oct. 25, 2007, the infantry team leader braved heavy enemy fire to rescue fellow paratroopers.


Giunta, of Company B, 2nd Battalion, 503rd Infantry Regiment, 173rd Airborne Brigade Combat Team, will be awarded the Medal of Honor, the U.S. military’s highest award for valor under fire.


The Hiawatha, Iowa-native is the first living service member to earn the award since Vietnam. The medal will be presented in a ceremony at a date and time still to be determined.


A 2003 graduate of Cedar Rapids Kennedy High School, Giunta has served two tours of Afghanistan. Now a staff sergeant serving in Vicenza, Italy, Giunta of Hiawatha, Iowa, knew of the nomination several months ago, but the announcement still came as a shock.


“This is a great honor, but it is not mine to take sole ownership of. I only did the next thing that needed to be done, and I was only able to do that because all of the men around me had the rest taken care of. It’s hard to take credit for simply taking the next step when so many steps had already been taken by everyone else,” Giunta said.


Not a day goes by that Giunta, now a staff sergeant serving at Vicenza’s Caserma Ederle, does not recall what he and fellow paratroopers faced that evening.


The first platoon of Company B – known to 173rd paratroopers as “Battle Company” – were heading back to their base camp in Afghanistan’s Korengal Valley following a long day watching over fellow paratroopers in an Afghan village. It was the final day of Operation Rock Avalanche. Throughout the day, enemy radio intercepts spoke of an impending attack.


Evening was approaching as Giunta’s platoon stretched in to a snaking file down the spur to the Korengal outpost. Roughly thirty paces separated each paratrooper as the moved out.


Sgt. Joshua Brennan, a 22-year-old team leader from Ontario, Ore., on his second tour in Afghanistan, was up front. Behind Brennan, manning an M249 squad automatic weapon, was Spc. Frank Eckrode then squad leader, Staff Sgt. Erick Gallardo, 24, Chula Vista, Calif.


AH-64 Apache helicopters chopped the moonlit evening above as the platoon made their way down goat trails.


Giunta, who carried an M-4 assault rifle was just behind with his team. Pfc. Kaleb Casey carried his M249 squad automatic weapon, followed by Pfc. Garrett Clary with an M203, a 5.56 mm rifle combined with a 40 millimeter grenade launcher.


Along their path, more than a dozen enemy fighters waited, readying their Russian-style rocket propelled grenades, PKM 7.62 mm heavy machine guns, and Kalishnikov rifles. They had set up an L-shape, with an RPG and PKM at the apex of the formation. As Brennan walked just 30 feet from their over watch position, the enemy open fired.


An enemy RPG exploded, followed by a burst of machine gun fire. Brennan fell to the ground. Machine guns fired at the platoon’s flank. Eckrode was hit. He dropped to the ground, returned fire and tried to find cover.


Gallardo tried to run forward, but was met with RPG explosions and sustained machine gun fire. He returned fire and started back to Giunta’s position, falling into a ditch as an AK-47 round struck his helmet. Giunta jumped up, exposing himself to deadly fire, to assist his squad leader.


Giunta ran just a few steps when two enemy AK-47 rounds struck his body. The first shot hit the body armor on Giunta’s chest, the second hit over his left shoulder, striking a disposable rocket launcher strapped to his rucksack. But Giunta kept going, reaching Gallardo and dragging him back to where Giunta’s fire team had begun fighting back.


Gallardo got Giunta’s team online and the four paratroopers began bounding through withering enemy fire to rescue Eckrode and Brennan. Dropping for cover, they prepared fragmentation grenades to throw at the enemy to cover their next move. Casey continued to fire his machine gun at enemy muzzle flashes, less than a half city block away. Gallardo counted to three and the team hurled grenades toward enemy positions. Once they heard the explosions, they moved closer to their wounded comrades.


Eckrode called out. He was wounded, but still trying to fight. Gallardo started first aid on Eckrode while Casey, who found a bullet hole in his uniform, scanned for enemy targets.


Giunta and Clary kept running toward where Brennan fell, only to find two enemy fighters carrying a severely-wounded Brennan away. While still running, Giunta fired his assault rifle, causing them to drop Brennan and flee. Giunta emptied the rest of his magazine, killing one enemy. Giunta knelt down to help Brennan as Clary ran past, firing 40-milimeter rounds toward the retreating enemy.


Giunta saw Brennan’s injuries were severe and required more than he could offer there on the battlefield. He removed Brennan’s gear and began treating his buddy, while calling back to Gallardo for help. Brennan was trying to talk. Giunta reassured his friend as he tended to Brennan’s wounds.


Other paratroopers from the platoon were also wounded. Spc. Hugo Mendoza, was killed. Brennan, who was hoisted into a helicopter, later succumbed to his wounds.


“Giunta is a great friend and an outstanding paratrooper,” said Gallardo, now serving with Battle Company in Afghanistan. “His actions that day meant the difference between life and death to myself and other Soldiers. For that I am grateful.”


To learn more about U.S. Army Africa visit our official website at www.usaraf.army.mil


Official Twitter Feed: www.twitter.com/usarmyafrica


Official YouTube video channel: www.youtube.com/usarmyafrica

Thursday, December 4, 2014

GF Machining Solutions - Milling - Mikron HSM 200U LP




The higher speed milling HSM 200U LP series has been designed for the highest precision and surface top quality. These vertical higher-speed machining centers are th…
Video Rating: five / 5

Friday, October 31, 2014

$6M contract signed Air Force and CCAT function to implement machining solutions

M contract signed Air Force and CCAT perform to implement machining solutions

The contract, “Manufacturing Technology Innovation for Cost Reduction,” is being awarded by the Air Force Analysis Laboratory to fund improvement and use of tools for metal and composite materials manufacturing for Air Force supply chain companies.
Study much more on Newbritainherald


Triad searching to increase manufacturing jobs

At the Weaver Academy in Greensboro, for example, Gene Holder directs programs that teach students such trades as machining, metal function and diesel repair. One particular of Holder&#39s most essential jobs, nonetheless, is displaying students — and their parents — that …
Study much more on Greensboro News & Record



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Thursday, October 30, 2014

Lastest Cnc Grinding Solutions News

Uni-Planet Capital Acquires Drake Manufacturing Solutions

Drake Manufacturing Solutions Co. is recognized globally as a marketplace leader for designing, creating and servicing state-of-the-art precision CNC thread, worm and profile gear grinders as effectively as rack and thread milling machines. For a lot more data …
Study a lot more on DigitalJournal.com


Revolutionary HSM Spindle to be Presented at JIMTOF 2014 in Japan

SPINJET, an revolutionary HSM Jet spindle that transforms ordinary CNC machine tools into higher-speed machines, will be presented at JIMTOF, the Japan International Machine Tool Fair, which will be held from October 30 to November four, 2014 in Tokyo.
Read a lot more on SYS-CON Media (press release)


Applications of Shenyang Hermos CNC machine

Shengyang Hermos CNC machine manufacturer is well-known on home and overseas markets. Shengyang Hermos CNC machine is producing cnc internal grinding machine, cnc surface grinding machine,cnc tough turning machine,and cnc challenging lathe machine&nbsp…
Read a lot more on Environmental Specialist (press release)



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Tuesday, October 28, 2014

Lastest Wire Cutting Solutions News

A Cord-Cutter&#39s Guide to the Best Streaming Solutions

Prepared for a life without having cable? Streaming is not just Netflix and Hulu any longer. With the news that HBO will release a stand-alone version of its HBO GO app in 2015, and an influx of other cord-cutting solutions — including CBS&#39s new All Access — we …
Read much more on Yahoo Tech


Appeal heard in Mickey Thompson murder case

Broker&#39s commission is a complete-service charge and will expense anyplace among 5% to 7%.• Neighborhood home transfer tax, county transfer tax, state transfer tax, and state capital gains tax are the charges that you&#39ll spend for the privilege of selling your residence …
Read a lot more on The Everyday Progress



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Friday, October 24, 2014

Mitsubishi Electric Automation: Technical Service and Support (TSS) - CNC Solutions




Mitsubishi Electric Automation strives for swift turnaround on all repairs. An ultrasonic cleaning method is utilised to treat and clean merchandise prior to becoming d…





Here at CNC Solutions Floor Coating Specialist in Crawfordsvile we do decorative concrete overlay to restore or change the appearance of current concrete sur…
Video Rating: / 5



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Monday, October 13, 2014

Fast Prototyping and Digital Sand Casting Solutions




Prometal-RCT is now under the name “ExOne” with a new channel http://www.youtube.com/user/ExOne3D Far more data on www.exone.com.



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Sunday, October 12, 2014

Cool Grinding Solutions pictures

A handful of good grinding solutions images I found:


Marines Lead Run to Ground Zero — Fleet Week New York 2011


Image by DVIDSHUB

A Marine with the 24th Marine Expeditionary Unit, bows his head and reflects in the shadow of the Ground Zero building website, May possibly 31. Marines with the 24th Marine Expeditionary Unit led a run to Ground Zero. The majority of Marines with the 24th MEU joined the Marine Corps right after the attacks of Sept. 11. More than 3,000 Marines, sailors and Coast Guardsmen in the area participating in neighborhood outreach events and equipment demonstrations as component of Fleet Week New York 2011. This is the 27th year New York has hosted the sea services for Fleet Week. (Official Marine Corps photo by Cpl. Karim Delgado / RELEASED)

Marine Corps Public Affairs Office New York

Date Taken:05.31.2011

Place:NEW YORK, NY

Associated Images: dvidshub.net/r/uje694


Frequent Ground – Save America’s Treasures


Image by wallyg
original photo


Common Ground – Save Amerca’s Treasures by National Park Service



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Thursday, October 9, 2014

Wayoe Engineering assure stakeholders of top quality solutions

Wayoe Engineering assure stakeholders of good quality solutions

Mr. Wayoe highlighted on some of the organization&#39s services which include General steel fabrication and welding, maintenance of procedure plant, Structural steel design and style, fabrication and erections, plate functions (tanks) chutes lauders, plant mechanical …
Read more on GhanaWeb


UTAH: A quite excellent (manufacturing) state!

… recession, it is on the rebound. The Utah Division of Workforce Services projects employment development in manufacturing will develop from 118,657 at present e to over 123,000 by 2015, and the lengthy-term projection for the year 2022 shows growth to …
Study a lot more on Insurance News Net


Nanotechnology in France: Industry Report

… generating items as diverse as consumables, automobiles, electronics and perfume. They also export products such as machinery and transportation equipment, aircraft, plastics, chemicals, pharmaceutical items, iron and steel, beverages, high end …
Study much more on AZoNano.com



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Sunday, October 5, 2014

EDM Services : Find out about the EDM Solutions that AccuteX Offers (513) 701 5550




http://www.accutexedm.com/service.html EDM Services 513-701-5550 The EDM solutions from AccuteX charges less than other EDM makers and nevertheless produces hig…
Video Rating: 3 / five





Out now on iTunes: http://bit.ly/1u2lJo1 Prime ten EDM 2014 brings you the hottest Electronic Dance Music in the scene at the moment. Integrated in this compilati…
Video Rating: four / five



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Friday, October 3, 2014

Lastest Speedy Prototyping Solutions China News

MoMA to Open &#39UNEVEN Growth&#39 Megacities Exhibition, 11/22

Uneven Development: Tactical Urbanisms for Expanding Megacities, a 14-month initiative to examine new architectural possibilities that address the rapid and uneven development of six global metropolises — Hong Kong, Istanbul, Lagos, Mumbai, New York, and Rio de …
Read much more on Broadway Planet


China&#39s 3D printing marketplace to quadruple

&quotWhile 3D printing has been touted as a way for Western economies to compete with China&#39s manufacturing positive aspects, the Asian giant is also taking fast strides to parlay its standard strengths into 3D printing as effectively,&quot Richard Jun Li, a Lux …
Study far more on Computerworld



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Contemplate technologies-based specialized industrial solutions

Contemplate technology-based specialized industrial services

… solutions that need advanced technologies backup. Having such a expertise base supplies improved accomplishment in field operate. In this case, the function extends to tasks such as leak repair, hot-tap (Fig. 1) and line-cease solutions, field machining, field …
Read far more on Hydrocarbon Processing


Regional manufacturing possibilities

Some people do function that is hand crafted even though other individuals manage pc controlled machining centers. We have leaders who manage complex systems of info and workflow coordinating … Some 90 students and employees from Mount Anthony, Burr and Burton …
Study much more on Bennington Banner


AT&ampF Expands Machining Capabilities with New CNC Heavy-Duty Vertical

The firm&#39s latest investment in machining gear will provide its customers the ability to purchase completed weldments from AT&ampF. Contract machining services can also be offered as needed. The new machine, paired with the existing horizontal …
Read much more on Organization Wire (press release)



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Tuesday, September 30, 2014

Cool Fast Machining Solutions pictures

Verify out these fast machining services photos:


Sgt. Joshua Brennan 25 OCT 2-503 BCO


Image by US Army Africa

Sgt. Joshua Brennan


U.S. Army photo


When enemy forces in Afghanistan’s Korengal Valley ambushed then-Spc. Giunta’s platoon on the evening of Oct. 25, 2007, the infantry team leader braved heavy enemy fire to rescue fellow paratroopers.


Giunta, of Organization B, 2nd Battalion, 503rd Infantry Regiment, 173rd Airborne Brigade Combat Team, will be awarded the Medal of Honor, the U.S. military’s highest award for valor below fire.


The Hiawatha, Iowa-native is the first living service member to earn the award considering that Vietnam. The medal will be presented in a ceremony at a date and time nevertheless to be determined.


A 2003 graduate of Cedar Rapids Kennedy High School, Giunta has served two tours of Afghanistan. Now a staff sergeant serving in Vicenza, Italy, Giunta of Hiawatha, Iowa, knew of the nomination many months ago, but the announcement nevertheless came as a shock.


“This is a excellent honor, but it is not mine to take sole ownership of. I only did the next factor that necessary to be completed, and I was only capable to do that simply because all of the guys around me had the rest taken care of. It’s challenging to take credit for basically taking the subsequent step when so numerous steps had currently been taken by every person else,” Giunta said.


Not a day goes by that Giunta, now a employees sergeant serving at Vicenza’s Caserma Ederle, does not recall what he and fellow paratroopers faced that evening.


The initial platoon of Business B – known to 173rd paratroopers as “Battle Company” – had been heading back to their base camp in Afghanistan’s Korengal Valley following a extended day watching over fellow paratroopers in an Afghan village. It was the final day of Operation Rock Avalanche. All through the day, enemy radio intercepts spoke of an impending attack.


Evening was approaching as Giunta’s platoon stretched in to a snaking file down the spur to the Korengal outpost. Roughly thirty paces separated each paratrooper as the moved out.


Sgt. Joshua Brennan, a 22-year-old team leader from Ontario, Ore., on his second tour in Afghanistan, was up front. Behind Brennan, manning an M249 squad automatic weapon, was Spc. Frank Eckrode then squad leader, Employees Sgt. Erick Gallardo, 24, Chula Vista, Calif.


AH-64 Apache helicopters chopped the moonlit evening above as the platoon created their way down goat trails.


Giunta, who carried an M-4 assault rifle was just behind with his group. Pfc. Kaleb Casey carried his M249 squad automatic weapon, followed by Pfc. Garrett Clary with an M203, a five.56 mm rifle combined with a 40 millimeter grenade launcher.


Along their path, much more than a dozen enemy fighters waited, readying their Russian-style rocket propelled grenades, PKM 7.62 mm heavy machine guns, and Kalishnikov rifles. They had set up an L-shape, with an RPG and PKM at the apex of the formation. As Brennan walked just 30 feet from their over watch position, the enemy open fired.


An enemy RPG exploded, followed by a burst of machine gun fire. Brennan fell to the ground. Machine guns fired at the platoon’s flank. Eckrode was hit. He dropped to the ground, returned fire and tried to discover cover.


Gallardo tried to run forward, but was met with RPG explosions and sustained machine gun fire. He returned fire and started back to Giunta’s position, falling into a ditch as an AK-47 round struck his helmet. Giunta jumped up, exposing himself to deadly fire, to help his squad leader.


Giunta ran just a handful of measures when two enemy AK-47 rounds struck his body. The 1st shot hit the physique armor on Giunta’s chest, the second hit more than his left shoulder, striking a disposable rocket launcher strapped to his rucksack. But Giunta kept going, reaching Gallardo and dragging him back to exactly where Giunta’s fire team had begun fighting back.


Gallardo got Giunta’s team online and the 4 paratroopers began bounding by means of withering enemy fire to rescue Eckrode and Brennan. Dropping for cover, they ready fragmentation grenades to throw at the enemy to cover their next move. Casey continued to fire his machine gun at enemy muzzle flashes, significantly less than a half city block away. Gallardo counted to three and the team hurled grenades toward enemy positions. As soon as they heard the explosions, they moved closer to their wounded comrades.


Eckrode referred to as out. He was wounded, but still trying to fight. Gallardo started very first help on Eckrode even though Casey, who located a bullet hole in his uniform, scanned for enemy targets.


Giunta and Clary kept running toward where Brennan fell, only to find two enemy fighters carrying a severely-wounded Brennan away. Although still operating, Giunta fired his assault rifle, causing them to drop Brennan and flee. Giunta emptied the rest of his magazine, killing one enemy. Giunta knelt down to help Brennan as Clary ran past, firing 40-milimeter rounds toward the retreating enemy.


Giunta saw Brennan’s injuries have been severe and required far more than he could provide there on the battlefield. He removed Brennan’s gear and began treating his buddy, while calling back to Gallardo for assist. Brennan was trying to talk. Giunta reassured his pal as he tended to Brennan’s wounds.


Other paratroopers from the platoon have been also wounded. Spc. Hugo Mendoza, was killed. Brennan, who was hoisted into a helicopter, later succumbed to his wounds.


“Giunta is a great friend and an outstanding paratrooper,” said Gallardo, now serving with Battle Firm in Afghanistan. “His actions that day meant the distinction in between life and death to myself and other Soldiers. For that I am grateful.”


To find out much more about U.S. Army Africa visit our official web site at www.usaraf.army.mil


Official Twitter Feed: www.twitter.com/usarmyafrica


Official YouTube video channel: www.youtube.com/usarmyafrica



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Saturday, September 27, 2014

Cool Plastic Machining Solutions photos

Verify out these plastic machining solutions images:


FUJIFILM 20 (Amsterdam 02:15PM)


Image by eastendimages

it was quite cold. i was tired following all night journey from london by means of france to eindhoven (by the coach). i took a train from eindhoven to amsterdam amstel in the middle on the night and following some local connection to the centre of amsterdam (with a wrong ticket, but the ticket collector geezer was really polite and relaxed, even though i didn’t punch my ticked which i purchased in some sort of self-service vending machine, but i cannot speak any dutch apart from few words which reminds me of german words i forgot lengthy time ago anyway). i found some spot to crash just opposite the holliday inn close to the station, but close adequate to the red light district and fall asleep. next morning i was on my hunt for the continental breakfast and packet of gitanes. i did not have any camera on me apart from some kinda crap i purchased on a ferry for my step daughter. it was fuji nexia APS. i purchased that camera only since it was purple and she liked purple a lot…



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Sunday, September 21, 2014

GF Machining Solutions - New corporate video coming from Italy




All about you! http://www.gfms.com/it.





Wir haben mit der HSM 200(U) LP ein völlig neuartiges Maschinenkonzept entwickelt. Die kompakte und leistungsstarke 3- bzw. five-Achs-Fräsmaschine vereint gebal…



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)

Saturday, September 20, 2014

AOP Manufacturing LLC | Precision Build-To-Print Machining Solutions | AS9100 Certified Machine Shop




AO Precision Manufacturing LLC is a trustworthy companion to the world’s major aerospace and defense organizations. Our AS9100-certified, Florida-primarily based, build-to-pr…



(Posted by a CNC machining China Company and precision CNC machined parts China manufacturer)