If you are about to buy a milling system then you must have done a survey in the market and found out that 4 axis is cheaper than the 5 axes. Let us know why is that. First, learn about the similarities and the difference among them. Axis in a CNC machine is the number of motors being driven for positional control of the tool. So when a VMC i.e, vertical mining center has an additional rotary axis to it, then it becomes 4 axis machine. When a machine has 3 regular axis and 2 rotary axes, then it is called 5 axis machine. Both of them have three linear axes.
The 4 axis machine is virtually operated. They are easy to operate, comes with a manual with all the instructions on it and have computer lead operations. It can operate on anything – wood, aluminum alloy, PBC, composite board, foam which is a wide range. It is specially built for detail work and can be in different departments – creative art, industry, medical equipment creation, technology research, etc.
5 axis is right now being called the best mining right now. It is high in quality, can do drillings, and is precisely engraved. It can create parts. It can make military grade products, car molds, medical technology, artificial bones, door frames, etc. It can cut almost everything.
The reason you will find the rates of 4axis lower than 5 axis is that of its features and qualities. As mentioned above, there is a lot of difference between both. While 4 axis can perform much work it still is back in the competition. The detailing and finishing in work 5 axis can provide, 4 axis cannot.
Another reason for the difference in price is the usage. Being advanced 5 axis brings with itself complexity. Managing it is not an easy thing, while on the other hand, 4 axis is user-friendly. It is more common in any case compared to 5-axis. Just by going through the manual anyone can operate it. The parts are not complex and are easy to handle. It also comes with a turning axis. But in order to make 5 axis work, you have to learn a lot. 5 axis comes with computer set up and all the setting are pre-programmed into it. You have learned how to control it. Even a small mistake in it can create a lot of mischief.
If you are cutting along an arc with your manual machine, then you should switch to 4 axis. It makes your work a lot easier. It is usually used for either indexing mode or continuous mode. In the first it is indexed to a fixed degree, in the latter, it is continuously rotated to produce something. With 4 axis you can give shapes which otherwise is very difficult. It makes your job faster and does not demand much setup. A 4th Axis can be a powerful addition to your CNC arsenal.
Whatever you need be it 3 axis, 4 axis or 5 axis CNC machining company in China are the best for it. CNC machining in China are the best at making all kind of CNC machines. CNC machining China makes all kind of machined parts in a wide variety.
For more information, please check out http://www.cncmachinings.com
No comments:
Post a Comment